SL100 Product Specifications

Introduction

The SL100 is based on a SOC with ARM Cortex-A7 dual core up to 1.2GHz as CPU platform and the LoRaWAN concentrator based on SX1302 + SX125x (Mini PCIe module).

Features

Below is the main features of SL100:

LoRaWAN Concentrator based on the Semtech SX1302 and SX125x
- Maximum Transmit output power up to 27dBm
- RX sensitivity down to -137 dBm @SF12, BW 125 KHz
ARM Cortex-A7 CPU dual core up to 1.2GHz with 128MB DDR3 RAM and 512MB Nand Flash
ECC608 encryption chip for storage of swarm keys
Wi-Fi: IEEE802.11b/g/n/ac
Bluetooth: BT V4.2
Ethernet backhaul with RJ45
Optional Frequency band: 470MHz/868MHz/915MHz/923MHz
RGB LED to show different status
DC12 supply with DC jack
Small Size:126 * 108 * 26mm
IP30 housing for Indoor
FCC、IC and CE certificates

Specifications

General Overview

Picture below show the apperance of the light hotspot SL100.

A RPSMA male connector is used as antenna connector. It is connected to a LoRa antenna, whose frequency will be 470~510MHz (for CN470), 860~870MHz (for EU868 and IN865), or 902~928MHz (for US915, AS923 and AU915).
RJ45 is connected to upper level router with a ethernet cable.
USB type A port used to program.
LED show different status of the hotspot.
A function Button.
DC+12V is a power supply input port. A DC 12V is used for this hotspot.